Liberty is the smallest Unit Hunter manufactures with a 16” Pulley although small in size it is built for Commercial use.
Primary Use:
Conveying flowable material vertically
Capacity:
500 BU/HR to 3500 BU/HR
12.7 MT/HR to 88.9 MT/HR
All capacities are based on 75% bucket fill
DIMENSIONS
- Head Ht. — 4 Ft. 5” & Discharge 8” x 13”
- Boot Ht. — 3 Ft. 6”
- Hopper Ht. — Up Side 34” & Down Side 24”
- Side Profile 34” — End View 10”
HEAD
- 12 Gal. Two Piece Construction
- 10 Ga. AR Liner, Front Crown & Discharge
- 16” Dia. X 11” Face, Drum Type Pulley
- Vulcanized Rubber, Lagging, Electrostatically Balanced
- 12” x 10” Inspection Opening
- Rubber Seal around bearings to eliminate dust
- Stress Proof Shafting
- Rubber Adjustable Throat Plate for accurate Clean Out
LEGGING
- 14 Ga. Standard or 12 Ga. Special
- Two Piece Design 10” x 13” Cross Section
- Inspection Section with Two 11” x 30” Door
- With Dust Seals
BOOT
- 12 Ga. Steel with 9” Travel Take-Up
- One Loading Boot Hopper 13” x 13”
- 1 15/16” Stress Proof Shaft with Pillow Block Bearings
- 16” Dia. X 11” Face Drum Type Pulley
- 8” Square Inspection Door
- Dust Seals in Take Up Area to Prevent Dust
- Two Clean Out Slides
Features:
- Coating — Powder Coated
- Blue or Your Color Choice
- Hot Dipped Galvanized
- 304 Stainless
- 10” PVK or Rubber Belting
- Polyurethane Buckets — Plain or Vented
More Information: