Lincoln series is manufactured with a 30” Pulley and a large housing capable of conveyance of may products.
Primary Use:
Conveying flowable material vertically
Capacity:
4,000 BU/HR to 8,000 BU/HR
101.8 MT/HR to 203.2 MT/HR
All capacities are based on 75% bucket fill
DIMENSIONS
- Head Ht. — 5 Ft. 10” Ft. & Discharge 10” x 18”
- Boot Ht. — 5 Ft. 6”
- Hopper Ht. — Up Side 52” & Down Side 40”
- Side Profile 54” — End View 18”
HEAD
- 10 Gal. Three Piece Construction
- 10 Ga. AR Liner, Front Crown & Discharge
- 30” Dia. X 15” Face, Drum Type Pulley
- Holtz, Lagging, Electrostatically Balanced
- 12” Square Inspection Opening
- Rubber Seal around bearings to eliminate dust
- Stress Proof Shafting
- Rubber Adjustable Throat Plate for accurate Clean Out
BOOT
- 10 Ga. Steel with 12” Travel Take-Up
- Two Loading Boot Hoppers 14” x 18”
- 27/16” Stress Proof Shaft with Pillow Block Bearings
- 30” Dia. X 15” Face Drum Type Pulley
- 8” Square Inspection Door
- Dust Seals in Take Up Area to Prevent Dust
- Two Clean Out Slides
LEGGING
- 14 Ga. Standard or 12 Ga. Special
- Two Piece Design 13” x 18” Cross Section
- Inspection Section with Two 18” x 30” Door
- With Dust Seals
GENERAL
- Coating — Powder Coated
- Blue or Your Color Choice
- Hot Dipped Galvanized
- 304 Stainless
- 14” PVK or Rubber Belting
- Polyurethane Buckets — Plain or Vented
Features:
More Information: