Franklin Series in manufactured utilizing a 42” Pulley the smallest of our commercial series.
Primary Use:
Conveying flowable material vertically
Capacity:
8,000 BU/HR to 15,000 BU/HR
203.2 MT/HR to 381.8 MT/HR
All capacities are based on 75% bucket fill
HEAD
- 10 Gal. Three Piece Construction
- 10 Ga. AR Liner, Front Crown & Discharge
- 42” Dia. X 19” Face, Drum Type Pulley
- Holtz, Lagging, Electrostatically Balanced
- 12” Square Inspection Opening
- Rubber Seal around bearings to eliminate dust
- Stress Proof Shafting
- Rubber Adjustable Throat Plate for accurate Clean Out
BOOT
- 7 Ga. Steel with 12” Travel Take-Up
- Two Loading Boot Hoppers 19” x 22”
- 37/16” Stress Proof Shaft with Pillow Block Bearings
- 42” Dia. X 19” Face Drum Type Pulley
- 8” Square Inspection Door
- Dust Seals in Take Up Area to Prevent Dust
- Two Clean Out Slides
LEGGING
- 12 Ga. Standard or 10 Ga. Special
- Two Piece Design 15” x 22” Cross Section
- Inspection Section with Two 22” x 30” Door
- With Dust Seals
GENERAL
- Coating — Powder Coated
- Blue or Your Color Choice
- Hot Dipped Galvanized
- 304 Stainless
- 18” PVK or Rubber Belting
- Polyurethane Buckets — Plain or Vented
DIMENSIONS
- Head Ht. — 8 Ft. & Discharge 22” x 22”
- Boot Ht. — 6 Ft. 6”
- Hopper Ht. — Up Side 66” & Down Side 54”
- Side Profile 70” — End View 22”
Features:
Other Information: